Drawmer-electronics MC2.1 Monitor Controller Manual de usuario descargar pdf (Pagina 23)

23

MC2.1 - Monitor Controller

CHAPTER 3

SPECIFICATION

Note: These specfications are provisional

and may alter slightly upon product

release.

INPUT

Maximum Input Level 21dBu

OUTPUT

Maximum Output Level

before clipping 27dBu

DYNAMIC RANGE

@ unity gain 118dB

CROSSTALK

L/R @ 1kHz >85dB

Adjacent Input >95dB

THD & NOISE

unity gain 0dBu input

0,0014%

FREQUENCY RESPONCE

20Hz-20kHz +/- 0.2dB

PHASE RESPONSE

20Hz-20kHz +/- 2degrees max

POWER REQUIREMENTS

115V or 230V at 50-60Hz, 20VA

Voltage set by internal voltage switch

FUSE RATING

@ 115V T315mA

@ 230V T160mA

Conforming to IEC 127-2

FUSE TYPE

20mm x 5mm, Class 3 Slo-Blo,

250Volt working

CASE SIZE

Depth (with Controls

& Sockets) 272mm

Width 215mm

Height (with Feet) 81mm

WEIGHT 2.5kg

For warranty service please call Drawmer

Electronics Ltd. or their nearest authorised

service facility, giving full details of the difficulty.

A list of all main dealers can be found on the

Drawmer webpages. On receipt of this

information, service or shipping instructions

will be forwarded to you.

No equipment should be returned under the

warranty without prior consent from Drawmer

or their authorised representative.

For service claims under the warranty

agreement a service Returns Authorisation

(RA) number will be issued.

Write this RA number in large letters in a

prominent position on the shipping box.

Enclose your name, address, telephone

number, copy of the original sales invoice and

a detailed description of the problem.

Authorised returns should be prepaid and must

be insured.

All Drawmer products are packaged in

specially designed containers for protection.

If the unit is to be returned, the original

container must be used. If this container is not

available, then the equipment should be

packaged in substantial shock-proof material,

capable of withstanding the handling for the

transit.

CONTACTING DRAWMER

We will be pleased to answer all application

questions to enhance your usage of Drawmer

equipment.

Please address correspondence to:

DRAWMER Electronics LTD

Coleman Street

Parkgate

Rotherham

South Yorkshire

S62 6EL

United Kingdom

Telephone: +44 (0) 1709 527574

Fax: +44 (0) 1709 526871

Contact via E-mail: tech@drawmer.com

Further information on all Drawmer products,

dealers, Authorised service departments

and other contact information can be found

on our website: www.drawmer.com

MC2.1 GENERAL INFORMATION

IF A FAULT DEVELOPS

1 2 ... 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios